One Left Torsion Spring with windings Bars 225 X 1 3/4 X 24 for Garage Door for use on Doors 7 or 8 high Doors

One Left Torsion Spring with windings Bars 225 X 1 3/4' X 24' for Garage Door for use on Doors 7' or 8' high Doors: Home Improvement. One Left Torsion Spring with windings Bars 225 X 1 3/4" X 24" for Garage Door for use on Doors 7' or 8' high Doors: Home Improvement. One Left Torsion Spring with windings Bars 225 X 1 3/4" X 24" for Garage Door for use on Doors 7' or 8' high Doors 。 Hand Wound: Left 。 Spring Length: 24" 。 WARNING: HIGH SPRING TENSION CAN CAUSE SERIOUS INJURY OR DEATH.Professional installation is recommended. Do NOT attempt to install springs or hardware yourself unless you have the proper tools, reasonable mechanical aptitude and experience, and upper arm strength. Extension and torsion springs, along with attached hardware, are under extreme tension at all times. All tension must be released from springs before any work is performed. 。 One Left Torsion Spring with windings Bars 225 X 1 3/4" X 24" for Garage Door for use on Doors 7' or 8' high Doors 。 Our Made in U.S.A. High Quality Coated Torsion Springs are factory coated black for smoother, cleaner operation and also corrosion resistant and oil tempered for longer life. 。For use on doors 7' or 8' high doors with 4" standard lift drums. Engineered for maximum application range. Minimum 10,000 cycles, at +/- 7.5 lbs of target door weight. Springs are made of steel coils with aluminum cones. 。How to Determine if Torsion Spring is Left Hand or Right Hand Wound: 。Standard springs are coded red and black. Red is right hand wind. Black is left hand wind. Always determine the wind of the wire. 。To determine if you are ordering a right wind spring or left wind spring the easiest way would be check the coloring coding - if is it red or black. 。Please note the side of door the spring is mounted DOES NOT indicate spring wind needed. Standard garage door systems have the right hand wound red winding cone on the end and will be mounted w/ the red winding cone pointing towards the LEFT. The left hand wound black winding cone will be mounted w/ the black winding cone pointing towards the RIGHT. 。Right hand wind would be wound counter clock wise in this diagram with the spring mounted on the left side of bracket. 。Left hand wind would be wound clockwise in the diagram with the spring mounted on the right side of bracket. 。After you've determined the the left & right hand winds you should have enough information to order. 。If you have questions, contact us. 。WARNING - Garage door springs, are under very high tension and, if handled improperly, can cause serious injury. Only a qualified professional or a mechanically experienced person should adjust them. If you attempt to make the repairs yourself, you are doing this at your own risk. Purchase of springs from us deems agreement with these terms 。 。 。

One Left Torsion Spring with windings Bars 225 X 1 3//4 X 24 for Garage Door for use on Doors 7 or 8 high Doors
One Left Torsion Spring with windings Bars 225 X 1 3//4 X 24 for Garage Door for use on Doors 7 or 8 high Doors
One Left Torsion Spring with windings Bars 225 X 1 3//4 X 24 for Garage Door for use on Doors 7 or 8 high Doors
One Left Torsion Spring with windings Bars 225 X 1 3//4 X 24 for Garage Door for use on Doors 7 or 8 high Doors
One Left Torsion Spring with windings Bars 225 X 1 3//4 X 24 for Garage Door for use on Doors 7 or 8 high Doors

خدمات تصــاميم

كل ما تحتاجة لزيادة أرياح شركتك من تصميم مواقع وتسويق الكتروني وإنشاء تطبيقات للمحمول وإنشاء محتوى قوي لتعزيز علامتك التجارية.

سابقة أعمال تصاميم

مدونة التسويق الالكتروني